- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
19'-21' Yamaha YXZ 1000R KWT Particle Separator
$399.00 – $415.00
Fits Yamaha YXZ 2019 to 2021
The KWT X2 Particle Separator has updated innovative cyclonic technology,...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
Corbuea SXS Pro Seat Fits Polaris Razor RZR 900 1000 & ACE, Black / Silver Carbon Fiber Vinyl Free Shipping
$520.00
Product Description
The SXS Pro is a direct bolt in (no extra brackets required) to the...
HONDA PIONEER MOTOBATT BATTERY OEM REPLACEMENT #MBYZ16HD
$136.69
Upgrade Your Pioneer Battery
Honda is known for their dependable machines, big or small. Your Pioneer...
Joker Machine 6061 Billet Black Utv Fire Extinguisher Mount 1 3/4" Roll Cage & 2.5lb Extinguisher
$235.00
Fire extinguisher holder is milled from a solid block aluminum. Once the pin is released...
POLARIS RANGER CREW XP 1000 2.2" X1 SERIES REAR EXIT SHOCKS (2014-2017)
$1,148.69
Fits Polaris General Years 2014-2017
2014-2017 Polaris Ranger comes with stock replacement rear uppers arms to...
CAN-AM DEFENDER HD10 2020-2024 RACKBOSS 2.0 RACK AND PINION NEW
$399.95
- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
-
Out of stock
Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Out of stockSelect options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Parts Manufacturer, Honda, KWT Particle Separator, UTV
19′-21′ Honda Talon KWT Particle Separator
$399.00 – $415.00 -
POLARIS, Service Manuals, UTV
2011-2013 Polaris Ranger Diesel / Diesel Crew Part#2011-2013 Polaris Ranger Diesel / Diesel Crew Part# 9924084 service shop repair manual service shop repair manual
Original price was: $95.00.$85.00Current price is: $85.00.