- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
20'-21' POLARIS RZR PRO XP KWT Particle Separator
$499.00 – $515.00
Fits RZR Pro XP 2000 to 2021
The KWT X2 Particle Separator has updated innovative cyclonic...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
ASSAULT INDUSTRIES SHREDDY™ B2C CONVEX SIDE MIRRORS UTV 1.875 Clamp New
$319.99
Fits 1.875 Roll Cage
DESCRIPTION
Assault Industries has linked with Shreddy™ to drop some badass new products on the world! Blake...Flat Side Mirrors Can-Am Maverick X3 Max SSP Right & Left UTV Joker Machine !
$149.99
Make your CAN-AM Maverick X3 street legal by adding Joker Machine 5" Round Mirrors. Also...
Joker Machine 6061 Billet Black Utv Fire Extinguisher Mount 1 3/4" Roll Cage & 2.5lb Extinguisher
$235.00
Fire extinguisher holder is milled from a solid block aluminum. Once the pin is released...
POLARIS RANGER CREW XP 1000 2.2" X1 SERIES REAR EXIT SHOCKS (2014-2017)
$1,148.69
Fits Polaris General Years 2014-2017
2014-2017 Polaris Ranger comes with stock replacement rear uppers arms to...
CAN-AM DEFENDER HD10 2020-2024 RACKBOSS 2.0 RACK AND PINION NEW
$399.95
- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
-
Out of stock
Select options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Parts Manufacturer, Honda, KWT Particle Separator, UTV19′-21′ Honda Talon KWT Particle Separator
$399.00 – $415.00 -
Out of stockSelect options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Parts Manufacturer, KWT Particle Separator, UTV, Yamaha
19′-21′ Yamaha YXZ 1000R KWT Particle Separator
$399.00 – $415.00 -
POLARIS, Service Manuals, UTV
2011-2013 Polaris Ranger Diesel / Diesel Crew Part#2011-2013 Polaris Ranger Diesel / Diesel Crew Part# 9924084 service shop repair manual service shop repair manual
Original price was: $95.00.$85.00Current price is: $85.00. -
Select options This product has multiple variants. The options may be chosen on the product pageQuick View