- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
15'-21' CAN-AM MAVERICK X3 Turbo KWT Particle Separator
$399.00 – $415.00
Fits Can-Am X3 Turbo 2015 to 2021
The KWT X2 Particle Separator has updated innovative cyclonic...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
20'-21' POLARIS RZR PRO XP KWT Particle Separator
$499.00 – $515.00
Fits RZR Pro XP 2000 to 2021
The KWT X2 Particle Separator has updated innovative cyclonic...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
CAN-AM MAVERICK X3 72" INTENSE SERIES LOWER RADIUS ROD SET
$359.00
Fits: CanAm Maverick X3
Our ZBROZ Intense Series® Lower Radius Rods were designed and built for...
CAN-AM X3/X3 MAX BULKHEAD REINFORCEMENT GUSSET KIT New !!
$299.69
ZBroz Bulkhead Reinforcement Gusset Kit
Fits:
Can-Am Maverick X3 64" / Max 64" (2017 - Current)
Can-Am Maverick...
POLARIS RZR TURBO S/TURBO S 4 INTENSE SERIES BILLET GUSSET PLATE NEW!!
$149.69
ZBroz Intense Series Billet Gusset Plate
Fits:
Polaris RZR Turbo S (2018 - 2021)
Polaris RZR Turbo S...
CAN-AM DEFENDER HD10 2020-2024 RACKBOSS 2.0 RACK AND PINION NEW
$399.95
- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
-
Select options This product has multiple variants. The options may be chosen on the product pageQuick View -
Out of stockSelect options This product has multiple variants. The options may be chosen on the product pageQuick View
-
Select options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Parts Manufacturer, KWT Particle Separator, POLARIS, Pro, UTV
20′-21′ POLARIS RZR PRO XP KWT Particle Separator
$499.00 – $515.00 -
-